- Battery Powered
- IP65 Sealed
- 24 Bit Resolution
- Strain Gauge Bridge Loadmeter
- Peak and Trough Hold
- RS-232 Output Option
- Analogue Output Option
SY031 strain gauge bridge meter is a battery powered hand held instrument. The 4.5 digit 24 bit instrument displays measurements from load cells and other strain gauge bridge transducers.
The load meter offers peak and trough hold and up to 16 channels of stored calibration data, stored in non-volatile memory. The meter is easy to calibrate by applying a known load,by shunt calibration and with fine adjustment facility to correct for drift over time in transducers. A TEDS enabled transducer version is also available.
The LCD displays are 10.2mm tall and give user friendly prompts to ease set up and calibration. The instrument displays scaled readings with peak and trough capture facility that can be switched in as required. With the option of RS232 added the unit can output readings at user programmable timed intervals.
We can offer a range of connectors to suit user requirement. Other options include a rubber holster a leather clear soft fronted case. 2 x AA batteries give 40 hours operation. There is no battery status indicator. If the unit will switch on it will measure accurately.
Case ABS Grey size 152L x 83W x 34D mm
- Sensor Input - mV/V Strain Gauge - £0.00
- Sensor Input - 4-20mA - £6.50
- Sensor Input - TEDS Transducer 4-20mA - £28.00
- Sensor Input - TEDS Transducer mV/V - £28.00 Enclosure
- Enclosure Option - None - £0.00
- Enclosure Option - Rubber Holster - £15.00
- Enclosure Option - Leather Clear Window Case - £22.00 Connector
- Connector - 4 Pin Standard - £0.00
- Connector - 5 Pin - £7.00 Output
- Output Option - None - £0.00
- Output Option - RS232 Jack Socket + Lead - £61.00
- Output Option - RS232 9 Way D Type + Lead - £68.00
You can choose one option from each group
Sensor
